SEW W series reducer
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Name: W series Spiroplan ® gear motor · 產品參數 Product parameters 優勢 Advantage 低噪音 Low noise 成本經濟 The cost of economic 終身潤滑 Permanent lubrication 輕質鑄鋁箱體 Lightweight aluminum box W系列 W series SPIROPLAN®減速電機是由堅固的SPIROPLAN®齒輪傳動組成的直交軸減速電機。與斜齒輪-蝸輪蝸桿減速機有三個主要區別:鋼對鋼傳動,特殊齒面嚙合和鑄鋁箱體。這些特性使得SPIROPLAN®減速電機無磨損,低噪音,重量輕。緊湊的結構設計和鑄鋁箱體,使SPIROPLAN®減速電機適用于對安裝空間和重量有限制的驅動方案。無磨損的傳動和終身潤滑使減速機可以長期免維護運行。由于潤滑與安裝位置無關,SPIROPLAN®減速電機可在任何安裝位置安裝而不改變加油量(M4安裝的W..37和W..47除外)。由于兩個底腳面的安裝孔間距相同,以及輸出軸中心到兩個底腳面的中心高相同,因此可以提供多種安裝位置。 SPIROPLAN ® gear motor is composed of SPIROPLAN ® Gear Solid orthogonal shaft gear motor. There are three main differences with the helical gear - worm reducer: steel to steel transmission, special meshing and cast aluminum box. These features make the SPIROPLAN ® no wear, gear motor with low noise, light weight. Structure design and cast aluminum body compact, make the SPIROPLAN ® gear motor is suitable for driving scheme with limited installation room and weight. No wear of the transmission and permanently lubricated and the speed reducer can be long-term maintenance free operation. Because the lubricating and installation position independent, SPIROPLAN ® deceleration motor can be installed in any position without changing the oil volume (except M4 installed W..37 and W..47). Due to the installation hole spacing two bottom feet of the same, and an output shaft center to the two bottom foot center height is same, so can provide many kinds of installation position. 可以提供以下規格的減速機 Reducer can provide the following specifications 底腳安裝或法蘭安裝 Foot mounting or mounting flange B5或B14法蘭安裝 B5 or B14 flange 實心軸或空心軸 The solid shaft and the hollow shaft |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SPIROPLAN Vertical shaft reducer type
|