SITI MK series stepless speed regulator
設計與制造
Design and manufacturing
機身外型由電腦輔助設計完成,齒輪的扭力,軸承的使用壽命,機身結構的強度等都是采用最現代化的檢測技術計算和設計的。
Body shape by computer aided design, gear torque, the service life of the bearing, the strength of body structure are detected by technical computing and the most modern design.
運行原理
Operation principle
機械調速器是指在輸入速度不變的原則下,可任意調節輸出速度的裝置。
The mechanical governor is the same in the input speed of principle, can be arbitrary regulation speed of the output device.
本質上來說,機械調速器是非齒輪組成的行星裝置。
In essence, the mechanical governor is a planet gear device composed of non.
此裝置的傳動是靠摩擦力來實現的,因此對裝置的的精確度和質量都有非常高的要求。
Transmission of this device is realized by frictional force, therefore the accuracy of the device and the quality of the requirements are very high.
此裝置分為單級調速器和配有螺旋傘齒輪箱的二級組合調速器。
This device is divided into a single stage regulator and a spiral bevel gear box two stage combined governor.
通過配上螺旋傘齒輪箱,該裝置既能允許比性能表中更低的輸入轉速和更高的扭矩。
Through the spiral bevel gear box, the device not only can allow than the input speed performance in lower and higher torque.
變速
Transmission
輸出速度是通過手動旋轉調速手柄來調節的,而且只有當變速器運轉時才能進行速度調節。
The output speed is adjusted by manual rotation speed control handle, and only when the transmission operation can speed adjustment.
性能關系
Property relationship
因為調速器是變量速度的裝置,而在功率恒定的基礎上,輸出扭矩就會隨著輸出速度的變化而變化,理論上表現為最低轉速對應最大扭矩,最高轉速對應最小扭矩。然而,樣本中提供的最大扭矩是在任何情況下都無法超過的,即行星摩擦盤開始滑動時的扭矩。
Because the governor is variable speed device, and based on constant power, output torque will change with the output speed, theoretical performance for the minimum speed corresponding to the maximum torque, maximum speed corresponding to the minimum torque. However, the maximum torque in the sample is provided for not more than in any case, namely the planetary friction wheel begins to slip when the torque.
技術特征
Technology characteristics
-行星和溝漕是由特殊的100Cr6合成鋼制造,這中材料更能確保部件在摩擦中達到最佳性能。
Planetary and groove is made by 100Cr6 synthesis of steel, the material can ensure the parts to achieve the best performance in friction.
-輸出軸是由42Cr Mo4淬火鋼或具有相同特質的材料制成。
The output shaft is made from 42Cr Mo4 hardened steel or has the same characteristics of materials.
-箱體是按UNI5007標準,采用灰鑄鐵制成。
- box is according to UNI5007 standard, is made of grey cast iron.
潤滑油
Lubricating oil
該裝置所添加的潤滑劑是具有冷卻和防磨損的特殊液體。
The addition of the device is a special liquid lubricant with cooling and anti wear.
性能
Performance
輸入功率 0,06 ~ 11kW
The input power 0,06 ~ 11kW
輸出扭矩 1.2Nm – 3000Nm
The output torque of 1.2Nm - 3000Nm
![]() |
SITI MK series stepless speed regulator 設計與制造 Design and manufacturing 機身外型由電腦輔助設計完成,齒輪的扭力,軸承的使用壽命,機身結構的強度等都是采用最現代化的檢測技術計算和設計的。 Body shape by computer aided design completed, gear torque, the service life of the bearing, the fuselage structure strength are measuring technology is used for the calculation and design of most modern. 運行原理 Operation principle 機械調速器是指在輸入速度不變的原則下,可任意調節輸出速度的裝置。 The mechanical governor refers to the constant input rate in principle, can be arbitrary regulation speed of the output device. 本質上來說,機械調速器是非齒輪組成的行星裝置。 In essence, the mechanical governor is a planet gear device composed of non. 此裝置的傳動是靠摩擦力來實現的,因此對裝置的的精確度和質量都有非常高的要求。 The transmission of this device is realized by frictional force, thus the accuracy of the device and the quality of the requirements are very high. 此裝置分為單級調速器和配有螺旋傘齒輪箱的二級組合調速器。 This device is divided into a single governor and is equipped with a spiral bevel gear box two stage combined governor. 通過配上螺旋傘齒輪箱,該裝置既能允許比性能表中更低的輸入轉速和更高的扭矩。 Through the spiral bevel gear box, the device can not only allow the input speed performance than the table in the lower and higher torque. 變速 Transmission 輸出速度是通過手動旋轉調速手柄來調節的,而且只有當變速器運轉時才能進行速度調節。 The output speed is adjusted by manual rotation speed regulating handle, and only when the transmission operation can speed adjustment. 性能關系 Property relationship 因為調速器是變量速度的裝置,而在功率恒定的基礎上,輸出扭矩就會隨著輸出速度的變化而變化,理論上表現為最低轉速對應最大扭矩,最高轉速對應最小扭矩。然而,樣本中提供的最大扭矩是在任何情況下都無法超過的,即行星摩擦盤開始滑動時的扭矩。 Because the governor is a device of variable speed, and in the basis of constant power, the output torque will change with the speed of the output, theory is the lowest speed corresponding to the maximum torque, maximum speed corresponding to the minimum torque. However, the maximum torque in the sample provided is never higher than in any case, namely the planetary friction disc start sliding torque at. 技術特征 Technical characteristics -行星和溝漕是由特殊的100Cr6合成鋼制造,這中材料更能確保部件在摩擦中達到最佳性能。 - the planets and the groove is made by 100Cr6 synthesis of special steel, this material can ensure the parts to achieve the best performance in the friction. -輸出軸是由42Cr Mo4淬火鋼或具有相同特質的材料制成。 Output shaft is made of 42Cr Mo4 steel quenching or has the same characteristics of materials. -箱體是按UNI5007標準,采用灰鑄鐵制成。 - box is according to UNI5007 standard, the use made of grey cast iron. 潤滑油 Lubricating oil 該裝置所添加的潤滑劑是具有冷卻和防磨損的特殊液體。 The addition of the device is a special liquid lubricant with cooling and anti wear. 性能 Performance 輸入功率 0,06 ~ 11kW The input power of 0,06 ~ 11kW 輸出扭矩 1.2Nm – 3000Nm The output torque of 1.2Nm - 3000Nm |